Giovanni Tangianu
Massa
Panoramica
32
32
years of professional experience
1
1
Certification
Esperienza lavorativa
Coordinator / Site Manager
Sinergy SRL
CODIGORO
2025.01 - 2025.11
- At ENFINITY GLOBAL, I oversee the management of the EPC contractor's activities, including material procurement processes, supplier relations, and HSE compliance within the construction site. I coordinate work schedules and shift planning. I am responsible for verifying MV cable tests using VLF and related control measurements. I also coordinate the construction and installation activities related to the HV tower and the associated transformer substation.
QA&QC Coordinator – E&I
Sinergy SRL
RAVENNA
2024.01 - 2025.01
- At ROSETTI MARINO, I manage documentation related to the company’s established quality standards, including the creation and periodic maintenance of quality registers. I supervise QA/QC Inspectors during Pre-Inspections/Inspections with the Client, ensuring compliance with the company’s control standards. I am responsible for training both office and field personnel, as well as organizing staff training courses. I handle material sourcing in accordance with project specifications and manage internal and client NCRs/OBs.
QA&QC Coordinator E&I
SIE SRL
AVENZA – MARINA DI CARRARA
2022.01 - 2024.01
- Management of documentation related to the quality standards established by the company, including the creation and periodic maintenance of registers. Supervision of QA/QC Inspectors for Pre-Inspections/Inspections with the Client, ensuring compliance with the company’s control standards. Training of both office and field personnel, as well as organizing staff training courses. Procurement research and material purchasing based on project specifications. Management of internal and client-related NCRs/OBSs.
Site Manager
FIRE&WIND S.R.L
ORISTANO (Impianto CWF presso ENEL)
2022.01 - 2023.01
- Activity management: Coordination of workers and specialized technicians; management of material procurement; management of supplier relations; HSE control of compliance with regulations on the construction site; organization of schedules and shifts.
QA/QC Inspector E&I
RENCO S.R.L
AVENZA PROJECT (CANADA NLG)
2021.01 - 2022.01
- Management of documentation relating to quality standards established by the company, documentation mark-up, creation of files for pre-inspection/inspection management. Additional activities, total control and management of the Heating System installation and review of drawings for all modules. Renco/BH commissioning.
QA/QC Inspector
SIE SRL
AVENZA – MARINA DI CARRARA
2020.01 - 2021.01
- Management of the Quality team for the preparation of pre-inspection/inspection systems with the customer. Creation of files for the management of pre-inspection/inspection activities. Management of personnel for the closure of the joint SIE/BH punch list.
QA/QC Inspector E&I
BOFFETTI S.R.L
RAVENNA-OFFSHORE PROJECT (CAMPO CERVIA)
2020.01 - 2021.01
- Management of maintenance and production support activities, with responsibility for material purchasing, pre-commissioning, commissioning, and vendor support activities.
QA/QC Coordinator Instrument Superintendent E&I
MAIRE TECNIMONT S.P.A
ABU DHABI, EPC Project ALL Dabb’iya Surface Facilities Project-Phase III
2018.01 - 2019.01
- Management of the Quality team for the preparation of pre-commissioning/commissioning and start-up systems with the customer. Preparation of RFI/RFC documentation, punch list management, and vendor management.
Superintendent E&I
SIIRTEC NIGI S.P.A
DUBAI EPC Project ALL Dabb’iya Surface Facilities Project-Phase III
2017.01 - 2018.01
- Activity management: management of operational and production activities on site, with the aim of ensuring compliance with quality standards, timelines, and budget.
Site manager costruction E&I
SIIRTEC NIGI S.P.A
LA SPEZIA Presso Gruppo Antonini S.P.A (Project ZHOR ONSHORE EGYPT)
2016.01 - 2017.01
- Management and control of the correct execution of external companies in the assembly of equipment. Verification and supervision of packing lists and supervision of material storage. Mark-up management, punch list.
Site manager costruction E&I
SIIRTEC NIGI S.P.A
RAVENNA- Presso RAM Service (Project OAO JSC MOZYR Combined unit production of high octane gasoline components)
2015.01 - 2016.01
- Management and control of the correct execution of external companies in the assembly of instrumentation. Verification and supervision of packing lists and supervision of material storage. Mark-up management, punch list.
Site manager costruction E&I
SIIRTEC NIGI S.P.A
RAVENNA-Presso RAM Service (Project GAZPROM LNG)
2014.01 - 2015.01
- Management and control of the correct execution of external companies in the assembly of instrumentation. Verification and supervision of packing lists and supervision of material storage. Mark-up management, punch list.
QA/QC Superintendent E&I
PROFILE Middle east
GRECIA (Presso METKA ALIVERI POWER PLANT 400MW)
2013.01 - 2013.01
- Management and control of E&I personnel during the construction and commissioning phases of the Precom/Comm and Start-up plant. Including vendor and materials management and related open punch lists for suppliers. Mark-up and punch list management.
QA/QC Inspector E&I
DANIELI s.p.a
IRAN (PRESSO Sangan iron plant)
2012.01 - 2013.01
- Management and control, verification of electrical/instrumentation equipment installation, with pre-loopcheck and pre-commissioning/commissioning verification until the plant is started up at full load no speed. Verification and calibration of conveyor belts and all plant instrumentation.
QA&QC Vendor Specialist E&I
Pietro Fiorentini S.P.A
MARE ADRIATICO (Presso Saipem FPSO Firenze 2, Package regeneration glycol)
2012.01 - 2012.01
- Management and control, verification of electrical/instrumentation equipment installation, with pre-loopcheck and pre-commissioning/commissioning verification until plant start-up.
QA&QC Vendor Specialist E&I
Pietro Fiorentini S.P.A
Turkmenistan (Bagtyarlyk water absorption package)
2011.01 - 2011.01
- Management and control, verification of electrical/instrumentation equipment installation, with pre-loop checks and pre-commissioning/commissioning until plant start-up.
QA&QC Vendor Specialist E&I
Siirtec Nigi S.R.L
IRAN Darquein (ENI Refinery)
2009.01 - 2010.01
- Management and control, verification of electrical/instrumentation equipment installation, with pre-loopcheck and pre-commissioning/commissioning verification until the regeneration glycol system is started up.
QA&QC Vendor Specialist E&I
Sicon Oil Gas S.R.L
Abu Dhabi (UAE N24 Gas compression stations)
2008.01 - 2008.01
- Management and control of RFI/RFC activities, vendor management coordination, documentation management, start-up management of gas compression stations.
QA&QC Inspector
Techimp Impianti S.R.L
Francia in Lyon (Total refinery)
2006.01 - 2007.01
- Management and control, loop checks, DCS process logic verification, pre-commissioning and commissioning, vendor assistance until the oil & gas plant is up and running.
QA&QC Inspector
Techimp Impianti S.R.L
Napoli in Teverola (Power plant 400MW Cogeneration Società SET)
2005.01 - 2006.01
- Management and control, loop check, DCS process logic verification, pre-commissioning and commissioning, vendor assistance until plant start-up and customer delivery.
QA&QC Inspector E&I
Techimp Impianti S.R.L
Svezia (Liselki Refinery oil&gas Preem Raff) revamping.
2004.01 - 2005.01
- Management and control, loop check, DCS process logic verification, pre-commissioning and commissioning, vendor assistance until plant start-up and customer delivery.
QA&QC Inspector E&I
Astel Sarda S.R.L
Uzbekistan ABB Soimi (plant Ethylene/polyethylene/butadiene)
2003.01 - 2004.01
- Management and control, loop check, DCS process logic verification, pre-commissioning and commissioning, PLC system logic verification, instrumentation verification and calibration with analyzer commissioning.
QA&QC Inspector E&I
Astel Sarda S.R.L
Porto torres ENEL Power
2002.01 - 2003.01
- Management of instrument calibration laboratory and analyzer maintenance, including material purchasing management and periodic plant inspections.
QA&QC Inspector E&I
Astel Sarda S.R.L
Porto torres plant Distom oil treatment S.P.A
2000.01 - 2001.01
- Management and control, loop checks, DCS process logic verification, pre-commissioning and commissioning, laboratory calibration management, and assembly supervision.
QA&QC Inspector E&I
Astel Sarda S.R.L
Porto torres Plant Phenol (Snam Eni)
1999.01 - 2000.01
- Management of instrument calibration laboratory and daily maintenance of analyzers (ROSEMOUNT/ABB refinery chromatographs) and all analysis instruments.
QA&QC Inspector E&I
Techint SPA
Cagliari Sarroch (refinery Saras PLANT Xiloli)
1997.01 - 1998.01
- Management and control, loop check, verification of process logic DCS, pre-commissioning - commissioning, verification of documentation and correct installation based on project documentation.
QC Inspector & operator
Centan SNC
Sassari (Sistema fire&gas STANDA)
1995.01 - 1996.01
- Verification of the correct installation of the fire protection system according to project procedures. With implementation and modifications to the drawings.
Aiutante strumentista
IESI SRL
Cagliari Presso REFINERY Sarroch (Saras)
1994.01 - 1995.01
- Laboratory technician, responsible for instrument calibration and certification. Loop check and installation verification activities based on project documentation. Preparation of documentation for certifications required by the project for RFI/RFC.
Istruzione
Istituto professionale elettrico/elettronico IPSIA
Competenze
- Microsoft Office (Word, Access, PowerPoint)
- Microsoft Windows
- Apple MacOS
- Android
- IOS
- Organizational skills
- Interpersonal communication skills
- Industrial instrumentation
- SCADA SYSTEM
- RTU systems
- Reading MEC documentation
- Reading ELE documentation
- Reading COSTR documentation
Certificazioni
- CMP: (PX2KREX-PXSS2KREX- TCM2-TCM-T3CDS)
- Hawke: (Training Certificate - 501/453/UNIV-ICG653/RAC-501/453/RAC-501/421-501/423-7Series)
- Swagelok: (tubing Fitting Installation Essentials)
- T.S.T: (TEMA SAFETY&TRAINING-For Specialised Marine Training Survival Techniques)
- CORTEC: (Training Certificate of use anticorrosive Vpci)
- Hilti : (Qualified Operator for Fastening on Steel Installation)
- Corso Formazione Preposto (Presso Uffici CSE)
- Corso Formazione Primo Soccorso
- Corso Lavori in Quota
- Attestato Lavori In Prossimità PES/PAV/PEI
- Attestato Corso Formazione Utilizzo DPI Terza Categoria Digs 81/08
Languages
Italiano
Inglese
Costume Section
- Very good knowledge of Microsoft Office (Word, Access, PowerPoint)
- Excellent familiarity with Microsoft Windows, Apple MacOS, Android, and iOS operating systems
- Soft/hard skills, organizational and interpersonal communication skills of staff
- Excellent knowledge of industrial instrumentation and processes, including SCADA SYSTEM/RTU systems
- Excellent knowledge of reading MEC/ELE/COSTR documentation
Cronologia
Coordinator / Site Manager
Sinergy SRL
2025.01 - 2025.11
QA&QC Coordinator – E&I
Sinergy SRL
2024.01 - 2025.01
QA&QC Coordinator E&I
SIE SRL
2022.01 - 2024.01
Site Manager
FIRE&WIND S.R.L
2022.01 - 2023.01
QA/QC Inspector E&I
RENCO S.R.L
2021.01 - 2022.01
QA/QC Inspector
SIE SRL
2020.01 - 2021.01
QA/QC Inspector E&I
BOFFETTI S.R.L
2020.01 - 2021.01
QA/QC Coordinator Instrument Superintendent E&I
MAIRE TECNIMONT S.P.A
2018.01 - 2019.01
Superintendent E&I
SIIRTEC NIGI S.P.A
2017.01 - 2018.01
Site manager costruction E&I
SIIRTEC NIGI S.P.A
2016.01 - 2017.01
Site manager costruction E&I
SIIRTEC NIGI S.P.A
2015.01 - 2016.01
Site manager costruction E&I
SIIRTEC NIGI S.P.A
2014.01 - 2015.01
QA/QC Superintendent E&I
PROFILE Middle east
2013.01 - 2013.01
QA/QC Inspector E&I
DANIELI s.p.a
2012.01 - 2013.01
QA&QC Vendor Specialist E&I
Pietro Fiorentini S.P.A
2012.01 - 2012.01
QA&QC Vendor Specialist E&I
Pietro Fiorentini S.P.A
2011.01 - 2011.01
QA&QC Vendor Specialist E&I
Siirtec Nigi S.R.L
2009.01 - 2010.01
QA&QC Vendor Specialist E&I
Sicon Oil Gas S.R.L
2008.01 - 2008.01
QA&QC Inspector
Techimp Impianti S.R.L
2006.01 - 2007.01
QA&QC Inspector
Techimp Impianti S.R.L
2005.01 - 2006.01
QA&QC Inspector E&I
Techimp Impianti S.R.L
2004.01 - 2005.01
QA&QC Inspector E&I
Astel Sarda S.R.L
2003.01 - 2004.01
QA&QC Inspector E&I
Astel Sarda S.R.L
2002.01 - 2003.01
QA&QC Inspector E&I
Astel Sarda S.R.L
2000.01 - 2001.01
QA&QC Inspector E&I
Astel Sarda S.R.L
1999.01 - 2000.01
QA&QC Inspector E&I
Techint SPA
1997.01 - 1998.01
QC Inspector & operator
Centan SNC
1995.01 - 1996.01
Aiutante strumentista
IESI SRL
1994.01 - 1995.01
Istituto professionale elettrico/elettronico IPSIA